Manufacturer of Portable Emissions & Combustion Analyzers and Indoor Air Quality Monitors

  +1 (215) 750-1212

Why Energy Auditors Need to Measure CO2 (IAQ)

Application Note #AQ-14-313

Why Energy Auditors Need to Measure CO2

An increasingly dangerous trend in home and building Energy Audits focus solely on the “Energy Efficiency” of the building while ignoring the potential risks of sealing “IN” CO2 emissions and moisture in the home causing serious health and comfort concerns. By sealing your home to be “Air Tight” for the purpose of decreasing gas and electric bills, you could also be making our buildings TOO TIGHT. In many cases, the benefits associated with a drop of energy usage carry a heavy price in the form of moisture damage and health risks produced by higher levels of CO2.

Until very recently, houses were designed and built with the concept of “A house should be allowed to breathe”. This self-ventilation strategy would provide for constant replenishment of the air supply to the occupants by balancing the quality of indoor “used” air (higher levels of CO2 and moisture), with “fresh” outside air (higher levels of oxygen).

Starting around the early 2000s, there has been a strong emphasis toward energy savings and the importance of reducing the individual’s carbon footprint. In addition, newer technologies including strong foam insulation, high efficiency windows, and airtight doors, among many others, have brought a push for TIGHT BUILDINGS by sealing homes and buildings from outside air. While these initiatives may be monetarily efficient, there is now a growing concern about the actual indoor air quality of the buildings and their effects on the health of their occupants, especially the young and elderly.

By making buildings too tight, we are locking in all of the pollutants generated inside the house (CO2, CO, smoke, odors, germs, VOCs, etc.). Those chemicals, if not dealt with carefully with an intelligent ventilation system, could make the premises very uncomfortable for the residents. Furthermore, people and pets could become drowsy, get sick more frequently, and have potentially fatal consequences in extreme cases.

The American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) created a standard (62.2) whereby they recommend a certain amount of air changes in the home depending on the size of the home and how many people live there.

CO2 Sources and Levels

Measuring CO2 is a simple, fast and effective way of determing the Indoor Air Quality and the effectiveness of the building’s ventilation system. A well-designed ventilation system is extremely important for diluting high CO2 levels and circulate clean fresh air back into the home or building. High CO2 readings are a MAJOR indication of poor ventilation, which could also signal a build-up of other air contaminants.

Indoor CO2 levels are directly affected and elevated by a number of sources including but not limited to the following:

  • Number of people and animals in a building
  • Gas & fuel burning appliances (Heating system, water heaters, dryers, etc)
  • Wood fireplaces and stoves
  • Cigarettes
  • Outside sources (Nearby highways, parking garages, industrial sources, etc.)
Levels of CO2 in the Air and Associated Health Problems
Concentration Effects
350 – 400 ppm Background (normal) outdoor air level
400 – 1,000 ppm Typical level found in occupied spaces with optimal air exchange
1,000 – 2,000 ppm Level associated with complaints of drowsiness and poor air
2,000 – 5,000 ppm Level associated with headaches, sleepiness, and stagnant, stale, stuffy air. Poor concentration, loss of attention, increased heart rate, and slight nausea may be present.
>5,000 ppm This indicates unusual air conditions where high levels of other gases could also be present. Toxicity or oxygen deprivation could occur. This is the permissible exposure limit for daily workplace exposures.


CO2 Monitoring Solution

The AQ PRO Indoor Air Quality Monitor

The measurement of the levels of CO2 indoors can be easily monitored using the E Instruments AQ Pro handheld IAQ monitor. With the BUILT-IN, quick internal sampling pump, the Home Energy Auditor can easily move from room to room to determine the CO2 level in each area of the building immediately and store the information accordingly. When required, the auditor may use the instrument’s capabilities to test and record the air quality for longer periods of time to determine the effects of some of the IAQ causes listed above. This will help the IAQ professional determine the base line for true Indoor Air Quality analysis and recommend the proper air ventilation and circulation requirements for the buildings.

Learn More Download Application Note